The Nest Doorbell is a cutting-edge security device that monitors activity at your front door. If you’ve decided to relocate or upgrade your Nest Doorbell, this guide will walk you through the steps regarding how to remove nest doorbell safely. Gather the tools listed below to get started.
Tools Needed to Remove the Nest Doorbell
If you have just purchased a flat house with the smart Nest Doorbell system installed but in a useless place, you can easily remove it and place it somewhere to enhance the monitoring process and its overall usage.
We have mentioned some tools you would need to remove nest doorbell.
- Screwdriver: specific to the model of your Nest Doorbell.
- long-nosed pliers for disconnecting the wires attached to the power source.
- Ladder or step tool, especially if the doorbell is installed at a higher spot.
- Electrical tape for covering any loose wires.
Once you have gathered all of these tools and equipment, you can uninstall the Nest Doorbell. We have discussed the detailed steps below for your help.
How to remove nest doorbell? Step-by-Step Guide
Here, we have mentioned the steps on how to remove a nest doorbell:
Step 1: Turn off the power supply
Before you practically start removing nest doorbell from its location, you must ensure that it is not powered on, as there can always be a risk of electrical accidents. You need to ensure your safety before you move on to the uninstallation process. To power off the supply, you must first locate your home’s electrical panel and circuit breaker. After that, you need to find the breaker that supplies current to the doorbell; upon finding it, you can switch it off and check the power light on the doorbell. Once you know the doorbell is turned off, you can proceed with the next step.
Step 2: Remove the faceplate of the doorbell
The next step is removing the faceplate of the nest doorbell. This part of the Nest covers the internal parts and provides an outer, sleek look to the overall device. To remove this plate, you must first locate the small screw on the bottom or either side of the device. Use your screwdriver to remove the screw, and then pull the plate away from the wall or the mounted bracket. When doing so, you must ensure that you don’t damage any internal components, as the faceplate is closely attached to the internal components.
Step 3: Disconnect the wires
Once the faceplate is removed, you must disconnect your Nest doorbell’s wires. Always ensure you handle the wiring carefully to prevent any mishaps. To disconnect the wires, you have to first find the ones that are connected to the back of the nest doorbell; you would find two wires on the backside, red and white. You have to pull apart these wires with the help of a plier and, if you don’t have one, with your fingers. Once the wires are disconnected, tape them to prevent any unwanted contact and damage.
Step 4: Detach the mounting bracket
Once the wires have been detached and safely taped, you must remove the mounting bracket holding the doorbell in place. The bracket is the component holding the nest on the wall or the door. To remove the bracket, you must first locate the screws securing the bracket and remove them using the right screwdriver. Once the screws are removed, you can lift the bracket and remove it from the frame. Make sure you don’t drop or break the mounting bracket if you want to install it somewhere else.
Step 5: Pull the Nest Doorbell apart
Now that you have pulled out the mounting bracket, you have to remove the nest doorbell itself. To remove the doorbell, gently pull it away from the bracket; don’t worry, it will easily slide out with minimum force. If you feel stuck, you have to check the bracket or if any screws need to be loosened. Once you pull out the nest doorbell, you should put it aside in a safer location where it won’t get damaged.
It is easy to remove the Nest doorbell from the installed frame.
What is the Nest Doorbell?
The Nest Doorbell is one of the latest security monitoring devices you can install at your premises and replace the conventional doorbell or CCTV camera systems. You can connect the Nest doorbell to your home WIFI network with the existing bell wires. The Nest App can easily provide a live view of the place where it is installed and enables you to listen and talk to people in its range. The Nest app and the doorbell can easily provide alerts and notifications for when you receive a parcel or package on your doorstep.
What does the Nest Doorbell do?
The Nest Doorbell has tons of features and applications. First, the Nest Doorbell has a camera with a zooming capacity of 1600×1200 pixels that can record HD videos and a night vision feature that helps you provide clear videos and pictures at night.
Unlike other video doorbells, Nest records videos and lets you talk to the person in view. With this camera, you can never miss anything crossing your driveway or entrance door.
The Nest Doorbell is a modern doorbell and video recording/communication gadget that helps you monitor your house’s entry points at all times.
For more details about what this amazing gadget can do, you can get this doorbell from Amazon or any other well-reputed e-commerce store and discover its features.
Conclusion
In conclusion, this guide walks you through the process on how to take off nest doorbell in great detail. If you have any problems or would like more help, consult the instructions in your Nest Doorbell box or contact tech support. We hope this guide has been useful in ensuring a smooth Nest Doorbell removal process.